Fortum Combination Rivet Drill Attachment

This game-changing Fortum Combination Rivet Drill Attachment empowers you to achieve professional results with ease. This tool combines two functionalities in one compact frame. It applies both nut and blind rivets, perfect to use with electric or battery-powered tools.

Key Features

• This Fortum 2-in-1 combination, drill rivet attachment, applies both rivnuts and blind rivets.
• It has a compact frame, reinforced internal mechanism, and a practical T-handle.
• Recommended to use electric or battery-powered tools with minimum required torque ranging from 2Nm to 22Nm (depending on the size and material of the rivet used).
• Clamping into the drill with the hexagonal 5/16" shaft.
• The drill speed for optimum performance is 20 rpm.
• The riveting attachment of the T-COMBO tool is factory set ready to work with nut rivets. To work with blind rivets, swap out the rivnut module and replace it with the supplied blind rivet module. The replacement procedure is explained in the provided instructions.
• Applicable sizes of rivnuts (M3-M4-M5-M6-M8-M10-M12) and blind rivets (2.4-3.2-4.0-4.8-6.0-6.4mm); from materials Al, copper, steel, and stainless steel.

*Note: The adapter can not be used with any type of impact electric, battery or pneumatic tool and must not be used with the hammer function.

All Product Details

Warranty