Magic Transfer Heat Transfer Vinyl with Puff Effect 25 x 30cm - Samples (15 Colours)

The Magic Transfer Heat Transfer Vinyl w/ Puff Effect is a must-have companion for your creative projects! This sample bundle features 15 colours, which adds a fun twist to your designs. With a generous size of 25 x 30cm, our vinyls open the door to crafting projects that leave a lasting impression. Its impeccable adhesive technology ensures a steadfast bond, whether applied using an iron or heat press.

Key Features

• Elevate your fashion game with our 3D Puff HTV Garment vinyl! Measuring 25 x 30cm, this versatile vinyl is perfect for use with iron-on or heat press applications and can be used with a variety of vinyl cutters, including Cricut and Silhouette Cameo*.
• Textured look. Puff garment HTV (heat transfer vinyl) is a type of vinyl that is designed to create a raised, three-dimensional effect when applied to garments or other textile items. It is thicker than regular vinyl and is made of a foam-like material that expands when heated. It gives a textured effect that adds depth and dimension to designs.
• Personalise your fashion apparel. Using this high-quality vinyl, you can easily customise your clothing items like t-shirts, hoodies, bags, and more. It can also be used on a variety of fabrics, including cotton, polyester, and blends.
• Fuss-free application. Its strong adhesive technology ensures that your designs will remain firmly infused with your fabrics. It also has a heat-activated adhesive on the back that is activated when used with a heat press or an iron. Plus, it offers an effortless application process, including cutting, weeding, and attaching.
• Perfect for business and personal use. Get creative and let your imagination run wild with our 3D Puff HTV Garment vinyl. With its exceptional quality and long-lasting results, it's the perfect choice for anyone looking to add a personal touch to their wardrobe or create custom items for their business.
• Thickness (160 microns/0.16 mm). Carrier sheet (100 microns/0.1mm).

Heat press setting

1. Preheat the heat press to 280°F-300°F (140°C-150°C).
2. Place your fabric onto the heat press and preheat it for 5-10 seconds to remove any moisture and wrinkles.
3. Place your design onto the fabric, with the carrier sheet facing up.
4. Apply heat and pressure for 15-20 seconds using medium to high pressure.
5. Peel off the carrier sheet while it is still warm.
6. If the vinyl is not fully puffed, repeat steps 4-5 until it is.

Iron-On setting

1. For using a household iron, set it to the Cotton/Linen or Wool setting, which is usually the highest temperature setting available.
2. Turn OFF the steam setting on the iron.
3. Preheat the area of the fabric where you want to apply the vinyl for 10-15 seconds.
4. Place the weeded image onto the preheated fabric, liner side up. Apply high pressure (very important) with the iron for 25-30 seconds, pressing down firmly and evenly with both hands.
5. Flip the fabric over and apply high pressure with the iron to the back of the material for an additional 25-30 seconds.
6. Gently peel off the carrier sheet while it is still warm.
7. If the vinyl is not fully puffed, repeat steps 4-6 until it is.

Care Instructions

1. Wait for 24 hours before washing the garment after applying HTV vinyl.
2. Turn the garment inside out and wash it in cold water using a gentle cycle.
3. Do not use bleach or any harsh cleaning agents that may damage the vinyl.
4. Do not tumble dry the garment. Hang or lay it flat to air dry.
5. Do not dry clean.
6. If necessary, iron the garment inside out using a low or medium heat setting, avoiding direct contact with the vinyl.

*Cricut and Silhouette Cameo are not included.

**Note: Always perform a test cut and test application on a small, inconspicuous area of your fabric before applying your design to your final project to ensure the best results.

***Note: Following these care instructions will help to preserve the quality and longevity of your heat transfer vinyl project.

All Product Details

Warranty

• bvseo_sdk, p_sdk, 3.2.1
• CLOUD, getContent, 313.64ms
• REVIEWS, PRODUCT
• bvseo-msg: HTTP status code of 404 was returned;

• bvseo_sdk, p_sdk, 3.2.1
• CLOUD, getContent, 335.42ms
• QUESTIONS, PRODUCT
• bvseo-msg: HTTP status code of 404 was returned;